Automated home 2.0 – #15 The Mechanical Ventilation heat recovery (MVHR) System

Our mechanical first fix is practically complete so it’s a good time to look at our MVHR system.

When spec’ing our first self-build in the late 1990’s we added this Drimaster PIV unit (Positive Input Ventilation).

This sent a low pressure feed from a vent in our hall ceiling, driving moist air out of the house and doing away with the requirement for trickle vents on all our windows and extractor fans in the wet rooms. Although it worked well, the down side was that as it pushed out our warm heated air, it drew in cold air from outside to replace it.

We knew we wanted a much more efficient system in the new house and so we looked around for a company with knowledge in low energy heating. We were lucky to find an expert best on our doorstep and back in February of 2017 we had our first meeting with Daly Renewables.

Daly’s describe themselves as “an engineer-led company committed to developing low energy efficient renewable energy systems”. We liked the fact that they are, as they put it, “a single point Responsibility”. We weren’t talking to a sales team either, but the engineer that would be developing our system.

An MVHR is effective in homes with an airtightness rating of around a 5 or lower but what exactly is it? ไปที่ไรอันเพื่อคำอธิบายเพิ่มเติม …

[UPDATE – here are the figures for our first years running cost]

โรงเรียนเก่า

The minimum form of ventilation currently required to satisfy building control is a combination of trickle vents and extract fans. A trickle vent is the most basic form of ventilation and consists of a slot opening in a window which can be manually opened and closed to let fresh air straight in from outside. This is uncontrollable and the problem with these occur during a cold windy night when you get a cold draught from the vent entering the room, which affects the comfort of the occupants. combined with extract fans in bathrooms, it begs the question – why insulate your home so well and leave what are efficiently holes in your walls and windows?

When we tighten a house to decrease energy consumption, we also risk making the building envelope susceptible to moisture problems, including mould (a major health issue) and rot. Excess indoor humidity can also increase dust mites and other allergens, damage electronic equipment and accelerate the outgassing of formaldehyde from common building materials and furnishings. If the house is in an area prone to ground radon, then radon accumulations can also increase in a tight house that is not correctly ventilated (though separate radon mitigation is much more effective at decreasing this risk).  A tight enclosure with mechanical ventilation will practically always offer better indoor air quality with lower energy bills and much more comfort than a leaky house depending on the house to “breathe”.  houses don’t breathe – people breathe and they do it 24/7 year around. An essential aspect of thermal comfort is humidity levels and directly related air quality.

Quite simply put- the better insulated and sealed a house is, the much more essential a controlled form of ventilation becomes.  
Ryan Daly

A better Way

The many efficient and effective type of ventilation is mechanical ventilation with heat recovery. In this system a pre-calculated flow of air is extracted from wet rooms, removing moisture, odours and VOC (found in paints, adhesives etc).

A supply of air is accurately placed into habitable rooms, ie each and every bedroom and living areas. A high efficiency heat exchanger recovers up to 90% of the heat energy in the extracted air into the incoming filtered fresh air.

We have fitted this Vent-Axia Sentinel Kinetic High flow unit into the new Automated Home. once it’s setup it requires little or no adjustment with an automatic summer bypass and a built-in humidity sensor that boosts the fan speed when it detects an increase in moisture (for example when taking a shower).

To it we have connected the Hybalans Ducting System and this routes the supply, as well as the discharge of ventilating air with the highest possible energy saving and maximum convenience.

Early planning is really beneficial here, so ensuring your Architect, Mechanical expert and Builder all know the site for the MVHR and the routes your ducting will take.

It consists of 2 manifolds, 1 for supply and 1 for Extract. The ducting is 92mm Semi rigid Plastic which runs to each individual room. The main advantage of this system is that it is very easy to balance, especially compared to a conventional teed off system which can be very hard to get the air flows appropriate on. The air quantities per air valve are simply centrally adjusted in the air distribution boxes. adjustment of the air valves is unnecessary.

เนื่องจากการสูญเสียความต้านทานต่ำการทำงาน
point and fan motor rpm of the HRV unit are reduced. This creates an extra
การลดเสียงรบกวนของระบบ

We thoเลือกหน่วย MHRV ประมาณเพื่อรับประกันว่าความสามารถในการทำงานของระบบอยู่ในหรือประมาณ 50%หรือน้อยกว่าที่เป็นไปได้

สำหรับ
หลายปีที่เราติดตั้ง HRV เป็นจำนวนบ้านที่เพิ่มขึ้น
ด้วยระบบนี้มีประโยชน์หลายประการมากกว่าผู้อื่น:

คัดค้านความต้องการช่องระบายอากาศหยดและพัดลมสกัด
ขนาดระบบที่เสนอ 0.75 ACh (การเปลี่ยนแปลงอากาศต่อชั่วโมง)
หน่วยเหล็กสกินคู่พร้อมฉนวนกันความร้อน 25 มม. โดยรอบ- เงียบเป็นพิเศษในการทำงาน
ตัวแลกเปลี่ยนความร้อน Counterflow – การกู้คืนความร้อนสูงถึง 90%
ระบบท่อระบายน้ำรัศมีของ Hybalans พัฒนาขึ้นเพื่อลบล้าง crosstalk ระหว่างห้องที่อยู่ติดกัน
บายพาสฤดูร้อนอัตโนมัติ
แฟน ๆ ประหยัดพลังงาน (เทคโนโลยีการเปลี่ยนอิเล็กทรอนิกส์)
คอนโทรลเลอร์ควรเสนอการปรับเวลาตามเวลาจริงกับความเร็วพัดลมอุณหภูมิอากาศที่ต้องการและสิ่งอำนวยความสะดวกที่เพิ่มขึ้นก่อนการตั้งโปรแกรม
การเพิ่มขึ้นของหน่วยโดยอัตโนมัติด้วยเซ็นเซอร์ความชื้นในตัว

อ่านต่อ…

ตอนนี้อ่านเกี่ยวกับปั๊มความร้อนของเราและอย่าลืมตรวจสอบ Instagram ของเราเพื่อติดตามโครงการอ่านข้อความบล็อก Automated Home 2.0 ที่เหลือและค้นหาลิงก์ไปยังผลิตภัณฑ์ทั้งหมดที่เราใช้ในการสร้างตัวเอง

dalyrenewables.com: ฟังพอดคาสต์นี้ในการออกแบบ MVHR

ขายดีอันดับ 1

Fantronix FTX MVHR D105-A เครื่องแลกเปลี่ยนความร้อนการระบายความร้อนเครื่องแลกเปลี่ยนความร้อนสำหรับการใช้พลังงานต่ำลดการควบคุมการควบแน่นของเชื้อราการควบคุมคุณภาพอากาศที่ดีขึ้น

Plug and Play: ชุดเครื่องระบายอากาศการกู้คืนความร้อนแบบ Slimline Slimline ในตัวด้วยตัวเองพร้อมด้วยการป้องกันน้ำค้างแข็งในตัวที่ใช้งานได้ง่ายต่อการติดตั้งคอนโทรลเลอร์ติดผนังที่พัฒนาและผลิตโดย FanTronix มีให้บริการในชุดที่สมบูรณ์สำหรับการติดตั้งในประเทศและเชิงพาณิชย์สำหรับห้องพัก 2-10 ห้อง หรือเพียงแค่ยูนิตสามารถซื้อได้ด้วยตัวเอง ติดตั้งได้อย่างง่ายดายด้วยชุดของเราซึ่งรวมถึงทุกสิ่งที่จำเป็นสำหรับการติดตั้งเต็มรูปแบบรวมถึงช่องระบายอากาศตะแกรงและท่อ
Ultra Compact & ใช้งานง่าย: พัฒนาขึ้นเป็นพิเศษสำหรับใช้ในคุณสมบัติขนาดเล็กเช่นอพาร์ทเมนท์สตูดิโอสำนักงานห้องสุขาที่มีการไหลเวียนของอากาศและพื้นที่น้อยกว่านั้นมี จำกัด จัดหาอากาศที่สะอาดสดและกรองอย่างต่อเนื่องในขณะเดียวกันก็สกัดมลพิษดังนั้นสภาพแวดล้อมของคุณจึงสะอาดและปราศจากละอองเรณูและฝุ่นที่เป็นอันตราย กำจัดการปรากฏตัวของการควบแน่นซึ่งต่อสู้กับการปรากฏตัวของความชื้นที่เป็นอันตรายเน่าเน่าและแม่พิมพ์ในพื้นที่เปียก
ระดับเสียงลดลง: อัตราการไหลเวียนของอากาศและสารสกัดจากความร้อนสูงถึง 29 L/s (106 m3/ชั่วโมง) มีฉนวนกันความร้อนและเสียงดูดซับหน่วยผิวสองชั้นลดระดับเสียงโดยรวมของเสียงลงเหลือ 24 dBA ปกป้องสภาพแวดล้อมในขณะที่ประหยัดเงินด้วยหน่วยแลกเปลี่ยนความร้อนที่ได้รับการประเมินอย่างมืออาชีพและพลังงานต่ำที่ทำงานอย่างเงียบ ๆ โดยใช้แรงดันไฟฟ้าต่ำพิเศษ

£ 319.10

ซื้อใน Amazon

ขายดีอันดับ 2

2 บทวิจารณ์

ชุดการกู้คืนความร้อนติดผนังติดตั้งห้องน้ำห้องน้ำในห้องน้ำเงียบ

£ 364.80

ซื้อใน Amazon

หนังสือขายดีหมายเลข 3

Nuaire MRXBOX95-WH2 2X การเปลี่ยนตัวกรองอากาศ MVHR แพ็ค G3 G4 M5 (MRXBOX-ECO4) (M5 (ละอองเกสร + แพ้))

24.99 ปอนด์

ซื้อใน Amazon

ขายดีอันดับ 4

1 บทวิจารณ์

ชุดการกู้คืนความร้อนของ Blauberg ติดผนังติดตั้งห้องน้ำห้องน้ำในห้องครัวแบบกระจายเงียบ

การดำเนินการกู้คืนความร้อนอย่างต่อเนื่องพร้อมด้วยตนเองหรือการควบคุมความชื้นโดยอัตโนมัติเวลาการไหลเวียนของอากาศและอัตราการระบายอากาศ
ควบคุมจากสมาร์ทโฟนระบบอัตโนมัติในบ้านหรือแท็บเล็ต Alexa, Echo ฯลฯ
หน่วยเชื่อมต่อโดยใช้ WiFi ไปยังหน่วยอื่น ๆ เพื่อนำเสนอโซลูชัน MVHR บ้านทั้งหมด

£ 384.00

ซื้อใน Amazon

ขายดีอันดับ 5

Envirovent Energisava 200 & 250 2x เปลี่ยน MVHR G3 G4 M5 ตัวกรองอากาศ (G4(พรีเมี่ยม))

£ 16.99

ซื้อใน Amazon

แบ่งปันสิ่งนี้:
Facebook
Twitter
สีแดง
LinkedIn
Pinterest14
อีเมล
มากกว่า

whatsapp
พิมพ์

Skype
tumblr

โทรเลข
กระเป๋า

อัปเดตล่าสุดเกี่ยวกับลิงค์ / รูปภาพในเครือ 2021-10-04 / Affiliate จาก API โฆษณาผลิตภัณฑ์ Amazon

Leave A Comment